Documentation

You are viewing the documentation for the 2.0.1 release in the 2.0.x series of releases. The latest stable release series is 3.0.x.

§Set-up a front-end HTTP server

You can easily deploy your application as a stand-alone server by setting the application HTTP port to 80:

$ start -Dhttp.port=80

Note that you probably need root permissions to bind a process on this port.

But if you plan to host several applications in the same server or load balance several instances of your application for scalability or fault tolerance, you can use a front-end HTTP server.

Note that using a front-end HTTP server will never give you better performance than using Play server directly.

§Set-up with lighttpd

This example shows you how to configure lighttpd as a front-end web server. Note that you can do the same with Apache, but if you only need virtual hosting or load balancing, lighttpd is a very good choice and much easier to configure!

The /etc/lighttpd/lighttpd.conf file should define things like this:

server.modules = (
      "mod_access",
      "mod_proxy",
      "mod_accesslog" 
)
…
$HTTP["host"] =~ "www.myapp.com" {
    proxy.balance = "round-robin" proxy.server = ( "/" =>
        ( ( "host" => "127.0.0.1", "port" => 9000 ) ) )
}
 
$HTTP["host"] =~ "www.loadbalancedapp.com" {
    proxy.balance = "round-robin" proxy.server = ( "/" => ( 
          ( "host" => "127.0.0.1", "port" => 9001 ), 
          ( "host" => "127.0.0.1", "port" => 9002 ) ) 
    )
}

§Set-up with Apache

The example below shows a simple set-up with Apache httpd server running in front of a standard Play configuration.

LoadModule proxy_module modules/mod_proxy.so
…
<VirtualHost *:80>
  ProxyPreserveHost On
  ServerName www.loadbalancedapp.com
  ProxyPass  /excluded !
  ProxyPass / http://127.0.0.1:9000/
  ProxyPassReverse / http://127.0.0.1:9000/
</VirtualHost>

§Advanced proxy settings

When using an HTTP frontal server, request addresses are seen as coming from the HTTP server. In a usual set-up, where you both have the Play app and the proxy running on the same machine, the Play app will see the requests coming from 127.0.0.1.

Proxy servers can add a specific header to the request to tell the proxied application where the request came from. Most web servers will add an X-Forwarded-For header with the remote client IP address as first argument. If you enable the forward support in the XForwardedSupport configuration, Play will change the request.remoteAddress from the proxy’s IP to the client’s IP. You have to list the IP addresses of your proxy servers for this to work.

However, the host header is untouched, it’ll remain issued by the proxy. If you use Apache 2.x, you can add a directive like:

ProxyPreserveHost on

The host: header will be the original host request header issued by the client. By combining theses two techniques, your app will appear to be directly exposed.

If you don’t want this play app to occupy the whole root, add an exclusion directive to the proxy config:

ProxyPass /excluded !

§Apache as a front proxy to allow transparent upgrade of your application

The basic idea is to run two Play instances of your web application and let the front-end proxy load-balance them. In case one is not available, it will forward all the requests to the available one.

Let’s start the same Play application two times: one on port 9999 and one on port 9998.

$ start -Dhttp.port=9998
$ start -Dhttp.port=9999

Now, let’s configure our Apache web server to have a load balancer.

In Apache, I have the following configuration:

<VirtualHost mysuperwebapp.com:80>
  ServerName mysuperwebapp.com
  <Location /balancer-manager>
    SetHandler balancer-manager
    Order Deny,Allow
    Deny from all
    Allow from .mysuperwebapp.com
  </Location>
  <Proxy balancer://mycluster>
    BalancerMember http://localhost:9999
    BalancerMember http://localhost:9998 status=+H
  </Proxy>
  <Proxy *>
    Order Allow,Deny
    Allow From All
  </Proxy>
  ProxyPreserveHost On
  ProxyPass /balancer-manager !
  ProxyPass / balancer://mycluster/
  ProxyPassReverse / http://localhost:9999/
  ProxyPassReverse / http://localhost:9998/
</VirtualHost>

The important part is balancer://mycluster. This declares a load balancer. The +H option means that the second Play application is on stand-by. But you can also instruct it to load-balance.

Apache also provides a way to view the status of your cluster. Simply point your browser to /balancer-manager to view the current status of your clusters.

Because Play is completely stateless you don’t have to manage sessions between the 2 clusters. You can actually easily scale to more than 2 Play instances.